Selective Call Rejection

This service allows you to create a list of 12 numbers that will be routed to an announcement and rejected. All other calls will be treated normally. The rejected party gets an announcement stating that their call is not being accepted by the called party.

Allows you to block up to 12 numbers. You can block selected numbers ahead of time or block unwanted calls. In either case, the caller is routed to a recorded message and your phone does not ring. The message they will hear is:

"Your call has been completed; however, the number you have called is not receiving calls at this time."

Setting Up A List

1. Listen for dial tone.

2. Press *60

3. Press #, dial the number, press #.

To Add The Last Calling Party

To add the last calling party after receiving an unwanted call and you don't know the number, do the following:

1. Listen for dial tone.

2. Press *60

3. Press #

4. Dial 01, then press #

To Access or Turn The Feature Off

1. List must be established first (see setting up a list).

2. Press *60.

3. Voice prompts will inform you if your list is on or off.

4. To turn your list on or off, press 3.

5. At least one telephone number must be placed in your list to be able to turn this feature on.

To Remove Entries From the List

1. Listen for dial tone.

2. Press *60.

3.Press *.

4. Dial the number to be removed followed by *.

5. To remove a privated number, dial *90*.